Shacman 12 cubic meters truck mounted concrete mixer pump self loading concrete mixer truck for sale Main features of concrete truck mixer
1) Material selection/Material: WISCO Q345 low alloy steel is used to make the mixer tank blades. Shanghai Baosteel B520JJ or QSTE420TM alloy steel can also be selected for customer requirements. 2) Cutting: All the company's sheet cutting, need to be programmed into the CNC plasma flame cutting machine for cutting and cutting. High efficiency and high precision in the blanking process
3) Cylinder production: There are three key process requirements for mixing car body: one is concentricity, the other is strength, the surface and helix angle of the three cylinder blades
1. Concentricity. Our Company's mixing car body adopts the special "mixing car body splicing tooling", which effectively guarantees the concentricity of the cylinder through the clamping position of the mixing cylinder flange, head, raceway and barrel connection.
2. Strength. The strength of the tank is mainly guaranteed by the welding process. The company uses automatic welding machine to carry out the ring seam of the tank, the welding of the longitudinal seam, and the welding consumables use the welding wire of a well-known brand.
3. The barrel of the cylinder. The barrel blades are the more critical components of the mixer truck. There are two symmetrically distributed logarithmic spirals in the body of the mixing car. The blades are designed in different sections of the cylinder to have different helix angles, pitches, elevations and chamfers, and eliminate the blades and the wall. The dead angle of the joint can realize three-dimensional space agitation; the feeding and discharging speed is fast, the concrete homogeneity is good, the yield rate is high, and no material is accumulated. The three main technical performance indicators of feed rate, discharge speed, concrete homogeneity and yield rate exceeded the national regulations.
Technical parameter of Shacman concrete mixer truck | Concrete mixing capacity | 8cbm | 10cbm | 12cbm | 14cbm |
| Cabin | Standard Cab, left or right hand drive
With two bunks, 70° hydraulically tillable to the front |
Vehicle Main Dimensions
(L x W x H)mm | 9400x2500x3920 | 9600x2500x3950 | 9850x2525x3950 | 10500×2496×3980 |
| Wheel base (mm) | 3625+1350 | 3825+1350 | 4025+1350 | 1800+3200+1350 |
Wheel track
(front/rear) (mm) | 1500/2725 | 1500/2365 | 1550/2915 | 1500/2380 |
| Approach/Departure angle(°) | 16/15 | 19/22 | 25/13 | 16/19 |
| Tare Weight | 13700 | 14500 | 15300 | 16500 |
| Loading Capacity | 27300 | 26500 | 25700 | 33500 |
| Front axles loading capacity | HF9 1x9000 | HF9 2x9000 |
| Rear axles loading capacity | HC16 2x16000 |
| Engine | Brand | Weichai |
| Model | WD615.47 |
| Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling |
Horse Power
(HP) | 371HP |
Emission
standard | Euro 2 |
| Gearbox | HW19710 , 10 forwards & 2 reverse |
| Clutch | Reinforced diaphragm clutch, diameter 430mm |
| Steering Gear | ZF 8118,power steering, hydraulic steering with power assistance |
| Fuel tank (L) | 300 |
| Tire | 12R22.5 tubeless tire , 10 pieces with one spare total 11 pieces. |
| Brakes | Service brake: dual circuit compressed air brake
Parking brake :(emergency brake): spring energy, compressed air operating on rear wheels
Auxiliary brake: engine exhaust valve brake |
| Mixing tank material | 16MnQ345 |
| Thickness for end plate | 8mm |
| Thickness for mixer body | 6mm |
| Feeding Speed (m3) | ≥3 |
| Discharging Speed (≥m3) | ≥2 |
| Leftover Rate | Nearly Zero |
| Max Rotating Speed (r/min) | 14---16 |
| Driving System | Speed Reducer | Italy brand PMP |
| Hydraulic Pump | Italy brand PMP |
| Hydraulic Motor | Italy brand PMP |
| Water Tank Capacity (L) | 400 |
Concrete mixer truck technical details 
Company introduction Xiagong Chusheng has a perfect service system, including pre-sale service, in-sale service and after-sale service. To provide high quality service for our customers, we train every salesman with necessary product maintenance knowledge and organized a Technology Supporting Department with a group of excellent and professional engineers. Any problem you can contact us at any time you like.
Pre-sale service:
1. Reply enquiries in 24 hours.
2. Market research and forecast for customer.
3. Provide unique and professional solutions based on customer's requirement.
4. Data sheet and samples offer.
5. Other services, such as special packing design, factory visiting and so on.
In-sale service:
1. Tracking report in producing.
2. Quality test report for every order.
3. Photos and videos as per customer's requirement.
4. Free spare parts.
After-sale service:
1. Lifetime free maintenance and upgrade.
2. Complaint respond period not exceed 24 hours; maintenance guidance and problem solution supplied in 48 hours.
3. Customer satisfaction tracking report.
4. Free technician training.
5. Full set of documents free of charge, which including installation guidance, software operation manual, easy maintenance manual and control system software CD and so on.
6. Special service for big project, such as stadium, exhibitions, squares and so on.
